PDF JN0-363 EXAM DUMP, JUNIPER EXAM DUMPS JN0-363 PROVIDER: SERVICE PROVIDER ROUTING AND SWITCHING, SPECIALIST (JNCIS-SP) PASS SUCCESS

Pdf JN0-363 Exam Dump, Juniper Exam Dumps JN0-363 Provider: Service Provider Routing and Switching, Specialist (JNCIS-SP) Pass Success

Pdf JN0-363 Exam Dump, Juniper Exam Dumps JN0-363 Provider: Service Provider Routing and Switching, Specialist (JNCIS-SP) Pass Success

Blog Article

Tags: Pdf JN0-363 Exam Dump, Exam Dumps JN0-363 Provider, Valid Exam JN0-363 Blueprint, JN0-363 Reliable Exam Dumps, JN0-363 Valid Test Objectives

BTW, DOWNLOAD part of PrepAwayETE JN0-363 dumps from Cloud Storage: https://drive.google.com/open?id=1FLnTqt4hsvlvbEmKrwyATL3hdtfLhcRn

All contents of the JN0-363 exam questions are masterpieces from experts who imparted essence of the exam into our JN0-363 study prep. So our high quality and high efficiency JN0-363 practice materials conciliate wide acceptance around the world. By incubating all useful content JN0-363 training engine get passing rate from former exam candidates of 98 which evince our accuracy rate and proficiency.

The JN0-363 Exam Tests the candidate's ability to configure, manage, and troubleshoot Juniper Networks routers and switches in a service provider environment. JN0-363 exam covers a variety of topics, including protocols such as OSPF, BGP, MPLS, and LDP, as well as technologies such as VPNs, QoS, and multicast. Candidates will also be tested on their ability to use Junos OS command-line interface (CLI) commands to configure and troubleshoot Juniper Networks routers and switches.

>> Pdf JN0-363 Exam Dump <<

Exam Dumps JN0-363 Provider | Valid Exam JN0-363 Blueprint

As the saying goes, knowledge has no limits. You may be old but the spirit of endless learning won't be old. If you attend the test of JN0-363 certification you will update your stocks of knowledge and improve your actual abilities, buying our JN0-363 exam practice materials can help you pass the test smoothly. There are no threshold limits to attend the JN0-363 test such as the age, sexuality, education background and your job conditions, and anybody who wishes to improve their volume of knowledge and actual abilities can attend the JN0-363 test.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q78-Q83):

NEW QUESTION # 78
Which OSPF database packet determines which router is in charge of the database synchronization and the transferring of LSA headers between the two systems?

  • A. database description
  • B. link-state update
  • C. link-state request
  • D. hello

Answer: A

Explanation:
the Database Description (DD) packets serve two main purposes:
1. determinining which router is in charge of the database synchronization
2. tansferring the LSA headers between the two systems
The Database Description (DBD) OSPF packet is used during the adjacency formation process to describe the contents of the topological database between routers. The routers exchange DBD packets to determine the master and slave relationship, which dictates the router in charge of the database synchronization.References:
OSPF Design Guide, Juniper Networks Documentation
OSPF Database Description Packets, Juniper Networks Documentation


NEW QUESTION # 79
Exhibit

Referring to the exhibit, which two additional steps should you lake to fully configure NSR? (Choose two.)

  • A. You should configure commit synchronization.
  • B. You must configure GRES.
  • C. You must configure graceful restart.
  • D. You should configure the max period for NSR precision timers.

Answer: A,B

Explanation:
https://www.juniper.net/documentation/us/en/software/junos/high-availability/topics/task/nsr-configuring.html Nonstop routing (NSR) requires both Graceful Routing Engine Switchover (GRES) and commit synchronization to be configured to maintain routing protocol and forwarding state during a Routing Engine switchover. NSR allows the secondary Routing Engine to take over the control plane without the protocols needing to restart, and GRES ensuresthat the forwarding plane continues operating with the current forwarding table. Commit synchronization ensures that configuration changes are synchronized between the primary and backup Routing Engines.
References:
Juniper Networks documentation on High Availability: Configuring Nonstop Active Routing


NEW QUESTION # 80
Referring to the exhibit, which two additional steps should you lake to fully configure NSR? (Choose two.)

  • A. You must configure GRES.
  • B. You should configure commit synchronization.
  • C. You must configure graceful restart.
  • D. You should configure the max period for NSR precision timers.

Answer: A,D


NEW QUESTION # 81
You are bringing a new network online with three IS-IS routers using default Junos election priorities. The routers are configured as Level 2 only IS-IS routers. Which statement is true about the DIS election in this scenario?

  • A. The router with the highest numerical lo0 IP address will be elected as the DIS.
  • B. The router with the lowest numerical lo0 IP address will be elected as the DIS.
  • C. The router with the highest MAC address will be elected as the DIS.
  • D. The router with the lowest MAC address will be elected as the DIS.

Answer: C

Explanation:
A router's priority for becoming the designated router is indicated by an arbitrary number from 0 through 127, which you configure on the IS-IS interface. The router with the highest priority becomes the designated router for the area (Level 1, Level 2, or both), also configured on the IS-IS interface. If routers in the network have the same priority, then the router with the highest MAC address is elected as the designated router. By default, routers have a priority value of 64.
https://www.juniper.net/documentation/us/en/software/junos/is-is/topics/concept/routing-protocol-is-is-security-designated-router-understanding.html


NEW QUESTION # 82
You configured interface ge-0/070.0 to run IS-IS. but this interface does not appear in the output of the show isis adjacency command as shown in the exhibit.

What is the problem in this scenario?

  • A. This is a Gigabit Ethernet interface, that is incompatible with the reference-bandwidth 100g statement.
  • B. The family iso statement must be added to the logical interface.
  • C. The router at the other end of the link Is not sending any IS-IS Hello messages.
  • D. The router at the other end of the link is a Level 1 only router.

Answer: B


NEW QUESTION # 83
......

We have chosen a large number of professionals to make JN0-363 learning question more professional, while allowing our study materials to keep up with the times. Of course, we do it all for you to get the information you want, and you can make faster progress. You can also get help from JN0-363 exam training professionals at any time when you encounter any problems. We can be sure that with the professional help of our JN0-363 Test Guide you will surely get a very good experience. Good materials and methods can help you to do more with less. Choose JN0-363 test guide to get you closer to success.

Exam Dumps JN0-363 Provider: https://www.prepawayete.com/Juniper/JN0-363-practice-exam-dumps.html

What's more, part of that PrepAwayETE JN0-363 dumps now are free: https://drive.google.com/open?id=1FLnTqt4hsvlvbEmKrwyATL3hdtfLhcRn

Report this page